HPA Regulator 4500psi (4500psi) HK Army Turbine Pro, black

HK Army Turbine Pro HPA Regulator - Long Body - 300 bar / 4500 psi - Black

The HK Army Turbine Pro Long Body is an adjustable high-pressure regulator for 300 bar / 4500 psi paintball air systems. Its output can be configured to 350, 450, 550 or 650 psi using the included laser-etched shims, and the regulator comes factory-set to 450 psi. A 360° rotational cap lets you position the gauge and fill valve exactly where you want them.

The Turbine Pro gives you precise control over output pressure when matching an HPA system to your marker. Four defined pressure settings cover a range of setups without relying on a continuously variable adjustment. Laser-etched shims make the selected configuration easy to identify during setup and servicing.

Position the connections to suit your setup

The regulator cap rotates through 360°, allowing the gauge and fill valve to be placed where they are comfortable and accessible. Flat alignment zones and locking set screws hold the selected position securely. Dual O-rings on the rotational cap provide an additional sealing interface when the regulator is screwed into the ASA.

Stable airflow, durable internals

A precision brass Air Flow Stabilizer slows the initial air surge, helps prevent unintended burst-disc activation and balances internal pressure for consistent air delivery. An enlarged pin valve, upgraded spring and durable O-ring specification support reliable recharge performance. The CNC-machined long body also provides a positive grip when handling the tank.

Built with servicing in mind

Low-profile burst discs reduce protruding contact points around the regulator. A full-colour micro gauge provides a clear view of remaining air pressure. The spring-activated fill valve helps keep debris out while the system is unpressurised, and the supplied rubber cover adds protection from dust and dirt. A comprehensive rebuild kit and the required small tools are included.

Features

• Adjustable high-pressure regulator for paintball HPA systems
• Output pressure configurable to 350, 450, 550 or 650 psi using laser-etched shims
• Factory-set to 450 psi
• 360° rotational regulator cap
• Position secured with set screws
• Dual O-ring sealing on the rotational regulator cap
• Precision brass Air Flow Stabilizer
• Enlarged pin valve and upgraded spring
• CNC-machined long-body housing
• Full-colour micro gauge
• Spring-activated fill valve with rubber cover

Technical Data

• Product type: Adjustable long-body paintball HPA tank regulator
• Maximum system pressure: 300 bar / 4500 psi
• Output pressure: 350, 450, 550 or 650 psi; factory-set to 450 psi
• Orientation: 360° rotational cap; position secured with set screws
• Sealing: Dual O-ring sealing on the rotational regulator cap
• Gauge: Full-colour micro gauge
• Overall length: 98 mm (3.85 in)
• Exposed length when fitted: 72 mm (2.85 in)
• Colour: Black

Included Items

• HK Army Turbine Pro Regulator - Long Body - Black
• 3 laser-etched pressure shims for the available output-pressure configurations
• Spare O-rings, including piston and pin-valve O-rings
• Burst-disc socket wrench
• Allen key and set screws
• Rubber fill-valve cover

Compatibility

For 300 bar / 4500 psi paintball HPA systems. Before installation, verify the tank thread, permitted tank pressure and the output pressure approved for the marker or ASA against the relevant manufacturer specifications.

Safety note: Only work on the regulator when the system is completely depressurised and follow the manufacturer's instructions.